Item #

Model Car Catalog

Price each

PTMC 1

Spark Plug Wire (1/25 scale) (please specify color) (5 ft.)

$3.75

(Blue, Red, Yellow, Black, Orange, Gray)
PTMC 2

Heater Hose (1/25 scale) (Black) (3 ft.)

$3.75
PTMC 3

Radiator Hose (1/25 scale) (Black) (2 ft.)

$3.75
PTMC 4

Spark Plug Wire Boots (1/25 scale) (Black) (8 per pack)

$2.50
Use these at the spark plug locations on the engine to give   
your wiring job that extra detail.
PTMC 5

Detailing Wire (1/25 scale) (please specify color) (3 ft.)

$3.75
This very fine wire can be used for detailing ignition systems, 
firewalls, computer leads, etc. (Blue, Red, Yellow, Black)
PTMC 6

Hood Pins (1/25 scale) (photoetch) (12 per pack) 

$4.75

These hoodpins are one piece (pin and plate) photoetched parts.   
PTMC 7 Nuts & Bolts/Bolt Heads (any scale)(photoetch)(please specify size) $8.75
Use these any place a nut and bolt or bolt head should go.
(.040 - small), (.030 - smaller), (.020 - smallest)

PTMC 8

Drag Chute Kit (1/25 scale) (resin with material covering)

$4.00

This is the ultimate in a 1/25 scale drag chute. Comes with inner resin chute core and outer textured material chute wrap. Another innovative product design by Pro Tech.
PTMC 9 State License Plate Set (1/25 Scale) (16 plates)

$3.75

(Michigan, Florida, New Jersey etc.)
PTMC 10 Performance Plate Set (1/25 Scale) (16 plates)

$3.75

(Ford, Mopar, Dodge. Mustang, etc.)
PTMC 11 State License Plate Set (1/43 scale) (16 plates)

$2.75

(Michigan, Florida, New Jersey, etc.)
PTMC 12 Performance Plate Set (1/43 scale) (16 plates)

$2.75

(Ford, Mopar, Dodge, Mustang, etc.)
Add that final detail to any 1/25 or 1/43 scale car or truck.
PTMC 13 Pre-Wired Distributor (1/25 scale) (machined aluminum) $7.75
(please specify color) (Blue, Red, Yellow, Black, Orange, Gray)
PTMC 14  Rubber Fuel Line (1/25 scale) (Black) (3 ft.)

$3.75

Use this to duplicate the rubber (neoprene) fuel lines on real vehicles.
PTMC 15 License Plate Frames (1/25 scale) (photoetch) (8 per pack)

$3.75

PTMC 16 License Plate Frames (1/43 scale) (photoetch) (8 per pack)

$2.75

Add these to our license plates for even more detail.
PTMC 17  5 Point Racing Harness (1/25 scale) (photoetch)

$3.75

PRO TECH's innovative design on our photoetched 5 Point Racing 
Harness makes it one of the easiest to assemble with very realistic
results.  Comes complete with belt material.
PTMC 18 Dzus Fasteners (1/25 scale) (photoetch) $4.75
Dzus fasteners are 1/4 turn (to lock/unlock) fasteners that are used on race cars, street cars etc.  They  are used primarily to hold down body panels like hoods, trunk lids etc.

PTMC 19

Braided Line (.018) (1/25 scale - fuel gauge, vacuum line, brake  $3.75

line etc.) (18 ins.)

PTMC 20 

Braided Line (.025) (1/25 scale - fuel line etc.) (18 ins.) $3.75

PTMC 21

Braided Line (.035) (1/25 scale - fuel line etc.) (18 ins.) $3.75

PTMC 22

Braided Line (.045) (1/25 scale - fuel line, oil line, heater hose etc.)  $3.75
(18 ins.)

PTMC 23

Braided Line (.060) (1/25 scale - oil line, heater hose etc.) (1 ft.) $3.75

PTMC 24

Braided Line (.080) (1/25 scale - radiator hose etc.) (1 ft.) $3.75
PRO TECH's Braided Line has been specially engineered to produce the most accurate looking braided line available, so you can achieve realistic results.  Also, all of our braided line is manufactured with a core, so line will not collapse when bent at sharp angles.  To complete your installation, use our machined aluminum hex fittings for that finished look.

       PTMC 39

Hex Fittings (for .018 Braided Line) (photoetch)                                        

PTMC 25

Hex Fittings (for .025 Braided Line) (machined aluminum) $8.75
(8 per pack)

PTMC 26

Hex Fittings (for .035 Braided Line) (machined aluminum) $8.75
(8 per pack)
PTMC 27 Hex Fittings (for .045 Braided Line) (machined aluminum) $8.75
(8 per pack)
PTMC 28 Hex Fittings (for .060 Braided Line) (machined aluminum) $8.75
(8 per pack)
PTMC 29 Hex Fittings (for .080 Braided Line) (machined aluminum) $8.75
(8 per pack)
PTMC 30 Valve Cover T-Bolts (1/25 scale) (photoetch) $3.75
PTMC 31 Valve Cover Wing Bolts (1/25 scale) (photoetch) $3.75
PTMC 32 Spark Plug Wire Looms (1/25 scale) (photoetch) $5.75
PTMC 33 Holley Dominator Carburetor (1/25 scale) (metal cast) $2.50
PTMC 34 Cirello Magneto Kit (1/25 scale) (resin cast) $3.75
PTMC 35 Mallory Ignition Coil (1/25 scale) (resin cast) $2.50
PTMC 36 MSD 6 Ignition Box (1/25 scale) (resin cast) $2.50
PTMC 37 MSD 7 Ignition Box (1/25 scale) (resin cast) $2.50
PTMC 38 Supercharger Pulley Set (1/25 scale) (metal cast) (includes belt) $3.75
PTMC 39 Hex Fittings (.024 I.D.) (photoetch)

$8.75  

Fittings for small line applications - fuel injection lines, nitrous lines, brake lines etc.
PTMC 40 Oil Filters (1/25 scale) (metal cast) (8 per pack) $3.50
PTMC 41 Interior Door/Window Cranks (1/25 scale) (metal cast)  $3.25
(8 per pack)

PTMC 42 Air Cleaner (9x2 in. Custom Style) (1/25 scale) $6.75
(machined aluminum) (includes photoetch wing nut)
PTMC 43 Air Cleaner (14x3 in. Custom Style) (1/25 scale) $7.75
(machined aluminum) (includes photoetch wing nut)
PTMC 44 Air Cleaner (9x2 in. Edelbrock Style) (1/25 scale) $6.75
(machined aluminum) (includes photoetch wing nut)
PTMC 45 Air Cleaner (14x3 in. Edelbrock Style) (1/25 scale) $7.75
(machined aluminum) (includes photoetch wing nut)
PTMC 46 Air Cleaner (4x2 in. Nostalgia Style) (1/25 scale) $6.75
(machined aluminum) (includes photoetch wing nut)
PRO TECH's Machined Aluminum Parts are some of the finest in the industry.  They are machined to the tightest of tolerances to produce a high quality, highly accurate, scale correct part.  With PRO TECH's Machined Aluminum Parts you too can achieve realistic results.

PTMC 47

Throttle Linkage (1/25 scale) (photoetch) $5.75
Use these throttle linkage arms for adding that extra detail to
carburetors, injector hats, barrel valves etc.
PTMC 48 Oil Breathers (1/25 scale) (machined aluminum) (2 per pack) $4.00
PTMC 49 Oil Breathers (1/25 scale) (open element style, includes filter  $4.00
element) (machined aluminum) (2 per pack)
PTMC 50 Dual Remote Oil Filter Unit With Filters (1/25 scale)  $3.25
(metal cast)
PTMC 51 Under-Dash Gauges (gauge faces-black) (1/25 scale) (photoetch) $5.75
PTMC 52 Under-Dash Gauges (gauge faces-white) (1/25 scale) (photoetch) $5.75
PTMC 53 Street Rod Gauges (set #1) (gauge faces-black) (1/25 scale) $4.75
(photoetch)
PTMC 54 Street Rod Gauges (set #1) (gauge faces-white) (1/25 scale) $4.75
(photoetch)
PTMC 55 Street Rod Gauges (set #2) (gauge faces-black) (1/25 scale) $4.75
(photoetch)
PTMC 56 Street Rod Gauges (set #2) (gauge faces-white) (1/25 scale) $4.75
(photoetch)
PTMC 57 Colored Street Rod Gauges (set #1) (1/25 scale) $2.50
(gauges only - use with PTMC 53, PTMC 54)
PTMC 58 Colored Street Rod Gauges (set #2) (1/25 scale) $2.50
(gauges only - use with PTMC 55, PTMC 56)
Use these street rod gauges in various colors with street rod sets above for a custom touch.
PTMC 59 Drag Chute (1/25 scale) (resin cast) $2.50
PTMC 60 Gas Cap (hinge style) (1/25 scale) (metal cast) (2 per pack) $3.25
Great for funny cars, dragsters etc. or anywhere you want a cool
looking cap, can also be used on oil and water tanks.
PTMC 61 Fuel Junction Block (1/25 scale) (resin cast) (with molded on  $2.50
fittings)
PTMC 62 Tee Fitting (use with PTMC 20, PTMC 25) (metal cast) $2.00
PTMC 63 Tee Fitting (use with PTMC 21, PTMC 26) (metal cast) $2.00
Use Pro Tech's Tee Fittings anywhere you need to split a line.
Use for dual feed carburetors, tunnel ram set-ups, oil lines etc.
Advanced modeling skills recommended.

PTMC 64

Pre-Wired Vertex Magneto (1/25 scale) (machined aluminum) $7.75
(please specify color - Blue, Red, Yellow, Black, Orange, Gray)

PTMC 65

Distributor Kit (1/25 scale) (machined aluminum/resin cast) $4.75
Kit comes with machined aluminum base, resin cast cap and
plug wire boot material for cap terminals. Use Pro Tech's Spark
Plug Wire (PTMC 1) and Ignition Coil (PTMC 66) to complete
your ignition system.

  PTMC 66  

Ignition Coil (1/25 scale) (machined aluminum) $3.25
This factory style coil comes with coil wire boot for coil terminal.

PTMC 67

Barry Grant Demon Carburetor (1/25 scale) (resin cast) $2.50
(Master done by Jeff Sauber exclusively for Pro Tech)
PTMC 68 Flex Fan Kit 17 inch diameter (1/25 scale) (2 per pack) (photoetch) $6.75
PTMC 69 Flex Fan Kit 15 inch diameter (1/25 scale) (2 per pack) (photoetch) $6.75
PTMC 70 Flex Fan Kit 13 inch diameter (1/25 scale) (2 per pack) (photoetch) $6.75
PTMC 71 Roll Bar Padding (1/25 scale) $3.75
Use Pro Tech's Roll Bar Padding to add more detail to those race car interiors.
PTMC 72 Tire Valve Stems (1/25 scale) (machined aluminum) (4 per pack) $4.75
Add that final detail to your wheel/tire assembly.