|
Item # |
1/16 - 1/18 Scale Model Car Catalog |
Price each |
| MCLS1 | Spark Plug Wire (1/16 – 1/18 scale) (3 ft.) (Black) | $4.75 |
| MCLS 2 | Spark Plug Wire Boots (1/16 – 1/18 scale) (Black) (8 per pack) | $3.50 |
| MCLS 3 | Large Detailing Wire (1/16 – 1/18 scale) (3 ft.) (please specify color – Blue, Red, Yellow, Black) | $4.75 |
| MCLS 4 | Small Detailing Wire (1/16 – 1/18 scale) (2 ft.) (please specify color – Blue, Red, Yellow, Black) | $5.75 |
| MCLS 5 | Roll Bar Padding (1/16 – 1/18 scale) (Black)............................. | $5.75 |
| MCLS 6 | Rod Ends/Link Kit (1/16 – 1/18 scale) (metal cast)................... | $3.50 |
| Kit comes with 2 metal cast rod ends and plastic rod link. Use in | ||
| combination with Pro Tech’s Throttle Linkage (MCLS 7) for that extra detail. | ||
| MCLS 7 | Throttle Linkage (1/16 – 1/18 scale)(photoetch)........................ | $7.75 |
| Use with Pro Tech’s Rod Ends/Link Kit (MCLS 6) for even more detail. | ||
| MCLS 8 | Distributor Kit (1/16 – 1/18 scale) (can also be used as a magneto) (resin cast) | $5.75 |
| MCLS 9 | Ignition Coil (1/16 – 1/18 scale) (machined aluminum).............. | $4.25 |
| MCLS 10 | 5 Point Racing Harness (1/16 – 1/18 scale) (metal cast)............. | $7.75 |
| Pro Tech’s innovative design on this 5 Point Racing Harness makes it one of the easiest to assemble with very realistic results. Comes complete with belt material. | ||
| MCLS 11 | Gas Cap (1/16 – 1/18 scale) (Great for fuel cells on funny cars | $4.25 |
| dragsters, pro street, etc.) (machined aluminum) | ||
| MCLS 12 | Fuel Junction Block (1/16 – 1/18 scale) (designed for single/dual | $3.75 |
| carburetor set-ups etc. comes with molded-on fittings) (resin cast) | ||
| MCLS 13 | Fuel Injection Block (1/16 – 1/18 scale) (resin cast).................. | $3.75 |
| Use for supercharged engines. This is the fuel block that is located behind the injector hat and behind the blower. To complete installation use Pro Tech’s Spark Plug Wire (MCLS 1 / Black) along with Pro Tech’s Hex Fittings (PTMC 25, in 1/25 scale catalog) for the eight injector lines. Use Pro Tech’s .035 Braided Line (PTMC 21) along with corresponding fittings (PTMC 26) for the fuel feed line to the block. | ||
| MCLS 14 | Mallory Ignition Coil (1/16 – 1/18 scale) (resin cast)................. | $3.75 |
| MCLS 15 | MSD 6 Ignition Box (1/16 – 1/18 scale) (resin cast).................. | $3.75 |
| MCLS 16 | MSD 7 Ignition Box (1/16 – 1/18 scale) (resin cast).................. |
$3.75 |
| MCLS 17 | Oil Filter (1/16 – 1/18 scale) (machined aluminum).................. | $4.25 |
| MCLS 18 | Dual Remote Oil Filter Unit With Filters (1/16 – 1/18 scale) (metal cast/machined aluminum filters) | $8.50 |
| MCLS 19 | Barrel Valve (1/16- 1/18 scale) (resin cast)................................. | $3.75 |
| This Barrel Valve is designed to be used with Pro Tech’s .035 | ||
| Braided Line (PTMC 21) and corresponding fittings (PTMC 26) | ||
| MCLS 20 | Drag Chute (1/16 – 1/18 scale) (resin cast)................................ | $3.75 |
| MCLS 21 | Full Face Helmet (1/16 – 1/18 scale) (resin cast)...................... | $3.75 |
| MCLS 22 | Holley Dominator Carburetor (1/16 – 1/18 scale) (resin cast) | $3.75 |
| MCLS 23 | Barry Grant Demon Carburetor (1/16 – 1/18 scale) (resin cast) | $3.75 |
|
Also check out Pro Tech’s 1/25 scale catalog as there are a number of multiple scale items that can be used for 1/16 – 1/18 scale, I have listed a few below. PTMC 7 - Nuts & Bolts/Bolt Heads, PTMC 19 – 24 Braided Line, PTMC 25 – 29 Hex Fittings. PTMC 62 & 63 Tee Fittings. I have listed Braided Line size to use for various applications below. |
|
Braided Line applications for 1/16 – 1/18 scale PTMC 19 – (.018) brake line, nitrous solenoid line, etc. PTMC 20 – (.025) nitrous fuel solenoid line, fuel gauges, nitrous gauges, etc. PTMC 21 – (.035) fuel line, etc, PTMC 22 – (.045) fuel line, heater hose, etc. PTMC 23 – (.060) heater hose, etc. PTMC 24 – (.080) small radiator hose, etc. |