|
Item #
|
Model Car Catalog |
Price Each |
| PTMC 59 |
Drag Chute (1/25 scale) (resin cast) ....................................... |
$3.25 |
|
|
|
| PTMC 60 |
Gas Cap (hinge style) (1/25 scale) (metal cast) (2 per pack)..... |
$3.75 |
|
|
|
| PTMC 61 |
Fuel Junction Block (1/25 scale) (resin cast) (with molded on fittings) |
$3.25 |
|
|
|
| PTMC 62 |
Tee Fitting (use with PTMC 20, PTMC 25) (metal cast) ........ |
$2.00 |
| PTMC 63 |
Tee Fitting (use with PTMC 21, PTMC 26) (metal cast) ........ |
$2.00 |
|
|
|
| PTMC 64 |
Pre-Wired Vertex Magneto (1/25 scale) (machined aluminum) (please specify color) (Blue, Red, Yellow, Black, Orange Gray) |
$9.75 |
|
|
|
| PTMC 65 |
Distributer Kit (1/25 scale) (machined aluminum/resin cast) |
$6.75 |
| |
Kit comes with machined aluminum base, resin cast cap and plug boot material for cap terminals. Use Pro Tech's Spark Plug Wire (PTMC 1) and Ignition Coil (PTMC 66) to complete your ignition system. |
|
|
|
|
| PTMC 66 |
Ignition Coil (1/25 scale) (machined aluminum) Comes with coil wire boot for coil terminal. |
$3.75 |
|
|
|
| PTMC 67 |
Barry Grant Demon Carburetor (1/25 scale) (resin cast) |
$3.25 |
|
|
|
| PTMC 68 |
Flex Fan Kit 17 inch diameter (1/25 scale) (2/pack) (photoetch) |
$7.75 |
| PTMC 69 |
Flex Fan Kit 15 inch diameter (1/25 scale) (2/pack) (photoetch) |
$7.75 |
| PTMC 70 |
Flex Fan Kit 13 inch diameter (1/25 scale) (2/pack) (photoetch) |
$7.75 |
|
|
|
| PTMC 71 |
Roll Bar Padding (Use Pro Tech's Roll Bar Padding to add more detail to those race car interiors). |
$5.75 |
|
|
|
| PTMC 72 |
Tire Valve Stems (1/25 scale) (machined aluminum).............. |
$6.75 |
|
|
|
| PTMC 73 |
Electric Fuel Pump with Filter (1/25 scale) (resin cast).......... |
$3.25 |
|
|
|
| PTMC 74 |
Holley Street Carburetor with Choke (1/25 scale) (3D printed) |
$3.75 |
|
|
|
| PTMC 75 |
Holley Street/Strip Carburetor (1/25 scale) (3D printed) |
$3.75 |
|
|
|
| PTMC 76 |
Monster Tachometer (1/25 scale) (3D printed) ...................... |
$5.75 |
|
Extra set of gauges available at .75 cents each. |
|
|
|
|
| PTMC 77 |
MSD Pro Mag 44 Magneto (1/25 scale) (3D printed) ............ |
$6.75 |
|
Extra set of decals available at .75 cents each. |
|
|
|
|
| PTMC 78 |
Plug Boots/45 Degree (1/25 scale) (3D printed) (10 pcs.) |
$4.50 |
|
These Plug Boots are designed to be used with our Spark Plug Wire (PTMC 1). These are the ultimate in plug wire detailing. |
|
|
|
|
| PTMC 79 |
Plug Boots/90 Degree (1/25 scale) (3D printed) (10 pcs.) |
$4.50 |
|
These Plug Boots are designed to be used with our Spark Plug Wire (PTMC 1). These are the ultimate in plug wire detailing. |
|
|
|
|
|
|
|
|
|
|
