|
Item #
|
1/16 - 1/18 Scale Model Car Catalog
|
Price each
|
|
|
|
| MCLS1 |
Spark Plug Wire (1/16 – 1/18 scale) (3 ft.) (Black) |
$4.75 |
|
|
|
| MCLS 2 |
Spark Plug Wire Boots (1/16 – 1/18 scale) (Black) (8 per pack) |
$3.50 |
|
|
|
| MCLS 3 |
Large Detailing Wire (1/16 – 1/18 scale) (3 ft.) (please specify color (Blue, Red, Yellow, Black) |
$4.75 |
|
|
|
| MCLS 4 |
Small Detailing Wire (1/16 – 1/18 scale) (2 ft.) (please specify color) (Blue, Red, Yellow, Black) |
$5.75 |
|
|
|
| MCLS 5 |
Roll Bar Padding (1/16 – 1/18 scale) (Black)............................. |
$5.75 |
|
|
| MCLS 6 |
Rod Ends/Link Kit (1/16 – 1/18 scale) (metal cast)................... |
$3.50 |
|
Kit comes with 2 metal cast rod ends and plastic rod link. Use in |
|
|
combination with Pro Tech’s Throttle Linkage (MCLS 7) for that extra detail. |
|
|
|
|
| MCLS 7 |
Throttle Linkage (1/16 – 1/18 scale) (photoetch)....................... |
$7.75 |
|
Use with Pro Tech’s Rod Ends/Link Kit (MCLS 6) for even more detail. |
|
|
|
|
| MCLS 8 |
Distributor Kit (1/16 – 1/18 scale) (can also be used as a magneto) (resin cast) |
$5.75 |
|
|
|
| MCLS 9 |
Ignition Coil (1/16 – 1/18 scale) (machined aluminum)............. |
$4.25 |
|
|
|
| MCLS 10 |
5 Point Racing Harness (1/16 – 1/18 scale) (metal cast)............ |
$7.75 |
|
Pro Tech’s innovative design on this 5 Point Racing Harness makes it one of the easiest to assemble with very realistic results. Comes complete with belt material. |
|
|
|
|
| MCLS 11 |
Gas Cap (1/16 – 1/18 scale) (Great for fuel cells on funny cars |
$4.25 |
|
dragsters, pro street, etc.) (machined aluminum) |
|
|
|
|
| MCLS 12 |
Fuel Junction Block (1/16 – 1/18 scale) (designed for single/dual |
$3.75 |
|
carburetor set-ups etc. comes with molded-on fittings) (resin cast) |
|
|
|
|
| MCLS 13 |
Fuel Injection Block (1/16 – 1/18 scale) (resin cast).................. |
$3.75 |
|
Use for supercharged engines. This is the fuel block that is located behind the injector hat and behind the blower. To complete installation use Pro Tech’s Spark Plug Wire (MCLS 1 / Black) along with Pro Tech’s Hex Fittings (PTMC 25, in 1/25 scale catalog) for the eight injector lines. Use Pro Tech’s .035 Braided Line (PTMC 21) along with corresponding fittings (PTMC 26) for the fuel feed line to the block. |
|
|
|
|
| MCLS 14 |
Mallory Ignition Coil (1/16 – 1/18 scale) (resin cast)................ |
$3.75 |
|
|
|
| MCLS 15 |
MSD 6 Ignition Box (1/16 – 1/18 scale) (resin cast).................. |
$3.75 |
|
|
|
| MCLS 16 |
MSD 7 Ignition Box (1/16 – 1/18 scale) (resin cast).................. |
$3.75 |
|
|
|
|
|
|
