|
Item #
|
Model Car Catalog
|
Price each
|
|
|
|
| PTMC 1 |
Spark Plug Wire (1/25 scale) (please specify color) (3 ft.)
|
$4.75
|
|
(Blue, Red, Yellow, Black, Orange, Gray) |
|
|
|
| PTMC 2 |
Heater Hose (1/25 scale) (Black) (2 ft.)...................................
|
$4.75 |
PTM C 3 |
Seat Belt Material (2.75" x 2.75") ..............................................
|
$2.75 |
|
This Seat Belt Material is a fine cotton textured paper that looks great for seat belts and other belt/strap applications. |
|
| PTMC 4 |
Spark Plug Wire Boots (1/25 scale) (Black) (8 per pack)
|
$3.50 |
|
Use these at the spark plug locations on the engine to give |
|
|
your wiring job that extra detail. |
|
|
|
|
| PTMC 5 |
Detailing Wire (1/25 scale) (please specify color) (2 ft.) ............
|
$5.75 |
|
This very fine wire can be used for detailing ignition systems, |
|
|
firewalls, computer leads, etc. (Blue, Red, Yellow, Black) |
|
|
|
|
| PTMC 6 |
Hood Pins (1/25 scale) (photoetch) (12 per pack) .......................
|
$6.75
|
|
These hoodpins are one piece (pin and plate) photoetched parts. |
|
|
|
|
|
PTMC 7
|
Nuts & Bolts/Bolt Heads (any scale)(photoetch)(please specify size)..
|
$10.75
|
|
Use these any place a nut and bolt or bolt head should go. |
|
|
(.040 - small), (.030 - smaller), (.020 - smallest) |
|
|
|
|
|
PTMC 8
|
Drag Chute Kit (1/25 scale) (resin with material covering) |
$5.75
|
|
This is the ultimate in a 1/25 scale drag chute. Comes with inner resin chute core and outer textured material chute wrap. Another innovative product design by Pro Tech |
|
|
|
|
| PTMC 9 |
State License Plate Set (1/25 Scale) (16 plates)......................... |
$3.75
|
|
(Michigan, Florida, New Jersey etc.) |
|
| PTMC 10 |
Performance Plate Set (1/25 Scale) (16 plates).......................... |
$3.75
|
|
(Ford, Mopar, Dodge. Mustang, etc.) |
|
| PTMC 11 |
State License Plate Set (1/43 scale) (16 plates)......................... |
$2.75
|
|
(Michigan, Florida, New Jersey, etc.) |
|
| PTMC 12 |
Performance Plate Set (1/43 scale) (16 plates).......................... |
$2.75
|
|
(Ford, Mopar, Dodge, Mustang, etc.) |
|
|
|
|
|
Add that final detail to any 1/25 or 1/43 scale car or truck. |
|
|
|
|
| PTMC 13 |
Pre-Wired Distributor (1/25 scale) (machined aluminum) |
$9.75 |
|
|
|
|
(please specify color) (Blue, Red, Yellow, Black, Orange, Gray) |
|
|
|
|
| PTMC 14 |
Rubber Fuel Line (1/25 scale) (Black) (3 ft.)........................... |
$4.75
|
|
Use this to duplicate the rubber (neoprene) fuel lines on real vehicles. |
|
|
|
|
| PTMC 15 |
License Plate Frames (1/25 scale) (photoetch) (8 per pack) |
$5.75
|
| PTMC 16 |
License Plate Frames (1/43 scale) (photoetch) (8 per pack) |
$2.75
|
|
Add these to our license plates for even more detail. |
|
|
|
|
| PTMC 17 |
5 Point Racing Harness (1/25 scale) (photoetch)..................... |
$4.75
|
|
PRO TECH's innovative design on our photoetched 5 Point Racing Harness makes it one of the easiest to assemble with very realistic results. Comes complete with belt material. |
|
|
|
|
| PTMC 18 |
Dzus Fasteners (1/25 scale) (photoetch).................................. |
$6.75 |
|
|
|
|
Dzus fasteners are 1/4 turn (to lock/unlock) fasteners that are used on race cars, street cars etc. They are used primarily to hold down body panels like hoods, trunk lids etc. |
|
|
|
|
C 3